4 CHANNEL SDS-450C AUDIO POWER AMPLIFIER

Rating:
100% of 100
$1,195.00
In stock

4 Channel SDS-450C Audio Power Amplifier by Class D Audio

4 Channel SDS-450C Audio Power Amplifier by Class D Audio. Upgraded power supply is standard with this amplifier. This amp features our newly designed State of the Art aluminum Enclosure with black brushed anodized front . One of our top of the line SDS amplifiers. 280W RMS Per Channel into 8 ohms, 560W RMS Per Channel into 4 Ohms. This amplifier features one of the finest balanced XLR input stages available and also single ended RCA jacks. Either of these inputs can be selected by a switch on the back of the amplifier. You will also see it has adjustable gain control for each channel that are also rear mounted. These can be used to adjust the amp to match output of your other equipment such as matching to the sweet spot of your preamp. They can also be used to setup and balance your room for best performance. Size: 17" X 13" X 3.5" Shipping Weight 26 Pounds.

Specifications:

Model  4 Channel SDS-450C
Number Of Channels 4
RMS Power Per Channel 8 Ohms 280W RMS X 4
RMS Power Per Channel 4 Ohms 560W RMS X 4
RMS Power in Bridge Mode 700W X 2 into 8 Ohms
Input Sensitivity 2V
Total Harmonic Distortion (THD) Better than .02% (normal listening is about .003%)
Frequency Response 10hZ to 35KHz
Input Impedance RCA 30K
Input Impedance XLR 45K
Voltage Gain for RCA Input Adjustable
Voltage Gain for XLR Input Adjustable
Power Requirements 110VAC or 230VAC
Dimensions (W x H x D) Inches 16" X 3.5" X 13"
Dimensions (W x H x D) Millimeters 406.4 X 89 X 330.2
Product Weight (lbs/kg) 24/ 10.9
Shipping Weight (lbs/kg) 26/ 11.8
Manufacturer Class D Audio
Write Your Own Review
You're reviewing:4 CHANNEL SDS-450C AUDIO POWER AMPLIFIER
Your Rating
Questions

1 Item

Show per page
  1. 2018-08-11 19:48:13

    How much power does it consume at the wall and how much would it be if I buy 2 of them.
    Thanks

    1 answer
    1. 2018-08-11 20:22:50

      When idling the amp will use about 15 watts. Total power usage Will depend on the volume level. A 20 amp circuit breaker will be fine. 30 amp circuit breaker if you plan on really pushing the amp hard. Please contact us directly at sales@classdaudio for pricing information.

      4 people found this answer helpful.
    2. Please type the letters and numbers below
Ask Your Question
Jot us a note and we’ll get back to you as quickly as possible.
Please type the letters and numbers below