BUILD YOUR OWN SDS-120C Power Amplifier

Build your own complete custom SDS-120C audio amplifier featuring our SDS-224 Class D Audio amplifier. 60W RMS X 2 into 8 Ohm and 120W RMS X 2 into 4 Ohm, also can be bridged into a single channel amp providing 240W RMS X 1 into 8 ohm. Single ended inputs, balanced inputs, rear mounted gain controls and more.. Our newly designed case with brushed anodize front in either black or silver. This amplifier features one of the finest balanced XLR input stages available and also single ended RCA jacks. Either of these inputs can be selected by a switch on the back of the amplifier. You will also see it has adjustable gain control for each channel that are also rear mounted. These can be used to adjust the amp to match output of your other equipment such as matching to the sweet spot of your preamp. They can also be used to setup and balance your room for best performance. Size is12" X 13" X 3.5". Shipping weight 19 pounds.

Specifications:

Model	SDS-120C Complete Kit
Number Of Channels	2
RMS Power Per Channel 8 Ohms	60W RMS X 2
RMS Power Per Channel 4 Ohms	120W RMS X 2
RMS Power in Bridge Mode	240W Into 8 Ohm Only
Input Sensitivity	2V
Total Harmonic Distortion (THD)	Better than .02% (normal listening is about .003%)
Frequency Response	10hZ to 35KHz
Input Impedance RCA	30K
Input Impedance XLR	45K
Voltage Gain for RCA Input	Adjustable
Voltage Gain for XLR Input	Adjustable
Power Requirements	110VAC or 230VAC
Dimensions (W x H x D) Inches	12" X 3.5" X 13"
Dimensions (W x H x D) Millimeters	304.8 X 89 X 330.2
Product Weight (lbs/kg)	17/7.7
Shipping Weight (lbs/kg)	19/8.6
Manufacturer	Class D Audio