CDA-254 Audio Amplifier, 125W X 2 - 8 Ohm, 250W X 2 - 4 Ohm

Availability: In stock

$145.00

OR

Quick Overview

Chosen as one of the best products of 2010 by Affforeable Audio Magazine


Class D Audio Amplifier - 125 Watts RMS X Two Channel Stereo into 8 Ohm, 250W RMS X 2 into 4 ohms, and 500W RMS into 8 Ohms in Single Channel Bridge Mode.. Brand New and made by us here in the USA! Only 4 1/4" X 4 1/2" Ultra Clean & Thunderous Powerful Sound Lead Free & Energy Efficient This audiophile quality two channel Class D audio power amplifier or single channel in full bridge mode. All housekeeping power supplies are built-in so only a dual voltage +/- 42 to +/- 52 volt power supply is required. Features click and pop noise reduction, over/under voltage protection, over current protection, over temperature protection, and more! The new version of this amp has terminal blocks for input and terminal blocks for power supply and speaker connections. The provided heatsink is enough for most situations, but if you plan to push this amp really hard, then you will have to add additional heatsink or mount it to aluminum plate. Easy to mount... 9/16" standoffs and mounting screws are also included. No soldering required.

CDA-254 Class D Audio Amplifier

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • CDA-254 Class D Audio Amplifier

Details

Features:

Stereo or Bridged Configuration
Power On / Off Switch
Power and Error LED’s
Click and Pop Noise Reduction
Over Temperature Protection
Over / Under Voltage Protection
Over / Under Current Protection
MOSFET DC Protection
All Housekeeping Power Supplies
Small Size: 4.5” X 4.25” X 1.25
Made in the USA by us... classDaudio.com
1 Year Parts and Labor Warranty

Specifications:

Output: 125W RMS X 2 - 8 Ohm, 250W RMS X 2 - 4 Ohm
Bridged Mode (Full Bridge) 500W RMS X 2 8 Ohm
THD+N, 1W - 1KHz: Better than .02%
Dynamic Range: 101 db
Efficiency: Over 90%
Required Power Supply: +/- 42 Volts DC to +/- 52 volts
Input Impedance 7K

Please see Owners Manual for Details. Please read directions carefully and you should not have any problems with this amplifier... it is very stable, durable, and easy to connect up. The PCB is also very clearly marked. This amplifier is built with the highest quality components and will provide years of enjoyment! No soldering needed, and can be hooked up and running in minutes! 

Description

Features:

Stereo or Bridged Configuration
Power On / Off Switch
Power and Error LED’s
Click and Pop Noise Reduction
Over Temperature Protection
Over / Under Voltage Protection
Over / Under Current Protection
MOSFET DC Protection
All Housekeeping Power Supplies
Small Size: 4.5” X 4.25” X 1.25
Made in the USA by us... classDaudio.com
1 Year Parts and Labor Warranty

Specifications:

Output: 125W RMS X 2 - 8 Ohm, 250W RMS X 2 - 4 Ohm
Bridged Mode (Full Bridge) 500W RMS X 2 8 Ohm
THD+N, 1W - 1KHz: Better than .02%
Dynamic Range: 101 db
Efficiency: Over 90%
Required Power Supply: +/- 42 Volts DC to +/- 52 volts
Input Impedance 7K

Please see Owners Manual for Details. Please read directions carefully and you should not have any problems with this amplifier... it is very stable, durable, and easy to connect up. The PCB is also very clearly marked. This amplifier is built with the highest quality components and will provide years of enjoyment! No soldering needed, and can be hooked up and running in minutes! 

Use spaces to separate tags. Use single quotes (') for phrases.

  1. First impressions Review by Rajesh
    Quality
    Price
    Value

    Months of my quest for my dream amp has finally come to an end or rather, it is a beginning of my pursuit for achieving Audio nirvana.

    I received the Class D Amp with it’s ‘low profile’ power supply .

    I connected the amp to the supplied ‘Low Profile Power Supply’ and linked it up to an old 10 Amp Audio Transformer with a secondary output of 30V AC. As a result, the DC output from the power supply would be 42.3V, slightly less than the optimum operating range of 45V to 60V of the Amp.

    I then connected the Amp to two-way tower speakers and played a demo disk from a very reputed speaker manufacturer.

    Wow, my jaw just dropped!!! What a music!!! All the instruments have come alive. Superb vocals, taut percussions, silky smooth strings, lively trumpets and saxophones!! The sound is clean but not clinical musical but not warm. The transients, the decay are so lively that it has to be heard to be believed.

    We listened to all types of music, from Pop to Rock, from Western Classical to Jazz. There is not even an iota of listening fatigue. Hats off to Tom of Class D Audio.

    (Posted on 6/12/10)

  2. Excellent Review by Don W.
    Quality
    Price
    Value

    I put this amp module into a 1U rack project box because I had a flat toroidal transformer. It is so cool to have 500 watts rms in a 1U rack. I have used this amp for some power hungry 4 ohm Bose speakers in stereo and also as a sub amp in bridge mode for a 18" B-52 subwoofer. Sound great and doesn't overheat like my other AB class amp projects. And for the money you can't touch the value you get with any commercial products especially in class D. (Posted on 4/22/10)

  3. Best Class D amp out there! Review by Jay G.
    Quality
    Price
    Value

    I bought this power amp as part of a complete package deal
    (see "KITS" at the top of the page). The amp itself features
    top quality workmanship, superior overall design, and best of all . . . the
    best sounding class D tonal quality I've ever heard! Tom also has the best customer service of any amp manufacturer I've ever dealt with. You really owe it to yourself to check out this power amp. It will blow you away! (Posted on 3/2/10)

  4. WOW!!! Review by roby2k
    Quality
    Price
    Value

    I'm from Italy.
    I bought the 250 X 2 4ohm version with his 300VA power supply.
    Good good good.
    I like it.
    I put 4 star in quality only becouse its input impedance is low, but i drive it with a 10K pot and sounds very very good.
    It's possible that with a good preamplifier sound will be better, but for me it's already outstanding.

    Thanks,

    Roberto. (Posted on 12/10/09)


Write Your Own Review

You're reviewing: CDA-254 Audio Amplifier, 125W X 2 - 8 Ohm, 250W X 2 - 4 Ohm

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value