Features:


Small Size - 5.25" X 3.75" (133.35mm X 95.25mm)
Click & Pop Noise Reduction
Short Circuit and Thermal Protection
Two Speed 12V Fan Output (most conditions will not require a fan)
Sync Input
Stereo or Bridged Configuration
House Keeping Power Supplies Built-In... only requires one 20V to 50V power Supply

Specification

Output stage supply voltage 20 V – 50 V
Number of channels 2
Load impedance 4 to 8 Ω
Output power, 8 Ω, 160 W
Dynamic range >100 dB(A)
SE to differential amplifier OPA1632D
Output stage TAS5615
Other features +15-V onboard switcher from PVDD supply
Output power, 1% THD+N, BTL, 8 Ω: 140 W 1 kHz, TA = 25°C
Output power, 10% THD+N, BTL, 8 Ω: 170 W 1 kHz, TA = 25°C
Output power, 1% THD+N, PBTL, 4 Ω: 270 W 1 kHz, TA = 25°C
Output power, 10% THD+N, PBTL, 4 Ω: 330 W 1 kHz, TA = 25°C
Maximum peak current, BTL: >7 A 1-kHz burst, 1 Ω, ROC = 22 kΩ
Maximum peak current, PBTL: >10 A 1-kHz burst, 1 Ω, ROC = 22 kΩ
Output stage efficiency: >90% 2 x channels, 8 Ω
Damping factor 27 1 kHz, relative to 8-Ω load
H-bridge supply current: 50 mA 1 kHz, input grounded
Idle power consumption: <3 W H-bridge supply, input grounded

Audio Performance

THD+N, BTL, 8 Ω: 1 W <0.03 % 1 kHz
THD+N, BTL, 8 Ω: 10 W <0.05 % 1 kHz
THD+N, BTL, 8 Ω: 50 W <0.05 % 1 kHz
THD+N, BTL, 8 Ω: 100 W <0.10 % 1 kHz
THD+N, BTL, 4 Ω: 1 W <0.05 % 1 kHz
THD+N, BTL, 4 Ω: 10 W <0.05 % 1 kHz
THD+N, BTL, 4 Ω: 50 W <0.05 % 1 kHz
THD+N, BTL, 4 Ω: 100 W <0.10 % 1 kHz
Dynamic range: >100 dB Ref: rated power, A-weighted, AES17 filter, 2 ch avg
Noise voltage: 320 μVrms A-weighted, AES17 filter
Click/pop, DC step: <30 mV Mute/unmute, no signal, 4 Ω
Channel separation, BTL: >89 dB 1 kHz
Frequency response: ±0.5 dB 100 W / 8 Ω, unclipped