SDS-250 POWER AMPLIFIER MODULE
SDS-250 Audio Power Amplifier with State-of-the-Art balanced or single ended inputs and adjustable gain. RMS power is 250 Watts X 2 into 4 Ohm, 125 Watts X 2 into 8 Ohm, and 500W into 8 Ohm in Bridged Mode. Wired Molex connectors and gain controls included.
Our new Super D Series audio power amplifiers are built on the highly acclaimed reputation of our CDA series amps. Our goal was to keep the excellent sonic qualities while adding a state-of -the art balanced input stage (also accepts standard single ended input) and external adjustable gain controls. We've also added a better cooling system, Molex connectors for external LED's, power switch, and gain controls (included). The balanced input stage is one of the finest available and normally only found on very expensive high-end equipment. When using single ended inputs, you can change a jumper to select inverted or non-inverted input as well... useful in some instances. The gain controls included with this kit feature a conductive plastic element for ultra low noise. Our Super D Series amps provide more life-like imaging and sound stage, along with the beautiful smooth tube-like sound we're known for. These amps are powerful, clean, quiet , and transparent. Specifications: · Output: 250 X 2 - 4 Ohm, 125 X 2 - 8 Ohm · Bridged Output: 500W X 1 - Bridged 8 Ohm (Full Bridge) · THD+N, 1W - 1KHz: Better than .02% · Dynamic Range: 101 db · Efficiency: Over 90% · Required Power Supply: +/- 40 Volts DC to +/- 50 Volts DC Accepts Balanced or Single Ended inputs at up to 18 volts. Input Impedance: 47K More specs coming soon. 1 Year Parts and Labor Warranty
Specifications:
| Model | SDS-250 |
| Number Of Channels | 2 |
| RMS Power Per Channel 8 Ohms | 125W RMS X 2 |
| RMS Power Per Channel 4 Ohms | 250W RMS X 2 |
| RMS Power in Bridge Mode | 500W Into 8 Ohm Only. Single Channel |
| Input Sensitivity | 2V |
| Total Harmonic Distortion (THD) | Better than .02% (normal listening is about .003%) |
| Frequency Response | 10hZ to 35KHz |
| Input Impedance RCA | 30K |
| Input Impedance XLR | 45K |
| Voltage Gain for RCA Input | Adjustable |
| Voltage Gain for XLR Input | Adjustable |
| Power Requirements | +/- 42 Volts DC to +/- 50 Volts DC |
| Dimensions (W x H x D) Inches | 4.25" X 1.5" X 5.5" |
| Dimensions (W x H x D) Millimeters | 108.0 X 38.1 X 139.7 |
| Product Weight (lbs/kg) | 1.5/ 0.7 |
| Shipping Weight (lbs/kg) | 2/ 0.9 |
| Manufacturer | Class D Audio |